Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Summit, WA

Deck Restoration & Staining for Cedar in Summit, WA

Low-pressure wash for cedar. Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer. Typical cost $800-$2,500.

When we handle deck restoration & staining for cedar in Summit, WA, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On cedar, the method we use is low-pressure wash.

How we clean it

Low-pressure washCleaning method
Usually 500-800 PSI; cedar is soft and marks easilyPressure

Cleaning solution: A wood cleaner and brightener suited to cedar.

What to know about cleaning cedar

Cedar decks and fences turn silver-gray as the surface weathers. Gentle cleaning with a wood cleaner and brightener brings back the color, and a penetrating stain keeps it longer.

Avoid: High pressure, which gouges the soft wood and raises the grain.

How often: Clean yearly; refinish every 2-3 years.

When to book deck restoration & staining for cedar

  • Stain peeling, flaking or worn through in traffic areas
  • Gray wood that soaks up water
  • Cracking, splitting or splinters
  • Black spots that come back after washing

Why it gets dirty

  • UV breaking down the stain and wood surface
  • Film-forming stains that peel instead of wearing
  • Water standing on boards
  • Mildew feeding on old finish

Easy upkeep between cleanings

  • Do the 'water drop test': if water soaks in instead of beading, the wood needs sealing
  • Replace or fasten loose boards and popped nails first
  • Keep the deck clean between finishes

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Stain over dirty or damp wood, which peels quickly
  • Stripping with too much pressure
  • Mixing incompatible old and new stains
  • Staining in direct hot sun, which leaves lap marks

How we handle deck restoration & staining for cedar

  1. Inspect the deck and the old finish and choose a stain with you
  2. Clean or strip the old finish
  3. Brighten the wood and let it dry fully
  4. Sand rough spots where needed
  5. Apply a penetrating stain or sealer and allow it to cure

Typical deck restoration & staining for cedar prices

$800-$2,500Typical range for a typical 200-400 sq ft deck with rails
1-2 days including dry timeTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for cedar

Serving Summit, WA and nearby towns

Wood decks and fences in Washington grow moss and mildew and can rot where moisture sits. Clean them every year and refinish during the dry summer.

Besides Summit (ZIP codes 98373, 98443 and 98446), we handle deck restoration & staining for cedar in Summit View (1.8 mi), Midland (2.3 mi), Waller (2.7 mi) and Puyallup (3.4 mi). Call (555) 010-0000 for a free quote in Summit.

Deck Restoration & Staining for Cedar: frequently asked questions

How much does deck restoration & staining for cedar cost in Summit, WA?

Deck Restoration & Staining for Cedar typically costs $800-$2,500 for a typical 200-400 sq ft deck with rails, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck restoration & staining for cedar?

For cedar: usually 500-800 PSI; cedar is soft and marks easily. What we avoid: high pressure, which gouges the soft wood and raises the grain. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck restoration & staining for cedar safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck restoration & staining for cedar?

Clean yearly; refinish every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Summit, WA

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Roof Cleaning for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $400-$1,000

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Summit, WA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote